Synergy Dual Stage 70K-100K - Gas Fired Radiant Heater high intensity – Single Stage
Zoom image

Synergy Single Stage 70K-100K BTU's


Not rated yet

For Performance, Reliability and Value, Synergy High Intensity Heaters Provide Energy Efficient Total Building Heating Solutions. Ignition options include 115V Direct Spark with 100% Lockout Manual Reset, 24V Direct Spark with 100% Lockout Manual Reset, and Millivot Self Energizing Standing Pilot with 100% Shutoff. Single stage double ceramic burner Btu availability from 70K-100K BTU's

 Contact your representative for your pricing!

  • $0.00
  • Specifications 17.4 kB
    It is the intent of this specification to identify design requirements and minimum standards for the quality, construction, delivery, installation, and operation of gas fired infrared heating equipment. Minor variations, in accordance with standard practice, shall be indicated on the shop drawings and submitted for approval.
  • Owners Manual 836.4 kB
    High Intensity Infrared Heaters Installation, Service, and Maintenance Manual
  • Sales Literature 334.2 kB
    Sales Literature - Synergy High Intensity Heaters
  • SKU
    0SY0XX.(N/P)-Single70-100

Information

Manifold Operating Pressure
Natural Gas: 6 inches WC
LP/Propane: 10 inches WC

Minimum Inlet Pressure
Natural Gas: 7 inches WC
LP/Propane: 11 inches WC

Maximum Inlet Pressure
Natural Gas and LP/Propane: 14 inches WC
1/2 inch FPT Gas Inlet

Warranty
1 year limited warranty

  • Manufacturer
    Combustion Research
  • Individual BTU Input and Fuel Type
    70K BTU's / Natural Gas (NG), 70K BTU's / Propane Gas (LP), 75K BTU's / Natural Gas (NG), 80K BTU's / Natural Gas (NG), 80K BTU's / Propane Gas (LP), 85K BTU's / Natural Gas (NG), 85K BTU's / Propane Gas (LP), 90K BTU's / Natural Gas (NG), 90K BTU's / Propane Gas (LP), 95K BTU's / Natural Gas (NG), 100K BTU's / Natural Gas (NG)
  • Ignition Type
    115V Direct Spark, 24V Direct Spark, Millivolt Self Energizing, *Millivolt Self Energizing Not avalible with 100K Btu's
  • Single/Dual Stage
    Single Stage
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment
  • Proven system design – over 40 years with more than 3 million burners placed in service.
  • Instant heat on demand: reaches maximum operating temperature in less than 1 minute.
  • No direct venting required: less roof penetrations.
  • May be used in protected outdoor environments.
  • Operates on Natural or LP/Propane Gas
  • Factory pre-wired, pre-piped and tested.
  • Highly polished mirror bright aluminum reflectors for maximum efficiency.
  • Corrosion-free aluminized steel main frame.
  • CSA International Design Certified to ANSI/CGA Standards
  • 2-Stage Models Available
    • 2-Stage operation based on ambient temperature variations.
    • Eliminate excess heat when not needed.
    • Capable of fast recovery when temperatures fall.
    • Optimum combustion in both operating stages.
    • Air and gas ratios are precisely matched for efficient, fuel saving operation.
    • 24-volt input for lower installation costs.

Manifold Operating Pressure
Natural Gas: 6 inches WC
LP/Propane: 10 inches WC

Minimum Inlet Pressure
Natural Gas: 7 inches WC
LP/Propane: 11 inches WC

Maximum Inlet Pressure
Natural Gas and LP/Propane: 14 inches WC
1/2 inch FPT Gas Inlet

Warranty
1 year limited warranty