Synergy Dual Stage 30K-60K - Gas Fired Radiant Heater high intensity – Single Stage
Zoom image

Synergy Single Stage 30K-60K BTU's


Not rated yet

For Performance, Reliability and Value, Synergy High Intensity Heaters Provide Energy Efficient Total Building Heating Solutions. Ignition options include 115V Direct Spark with 100% Lockout Manual Reset, 24V Direct Spark with 100% Lockout Manual Reset, and Millivot Self Energizing Standing Pilot with 100% Shutoff. Single stage single ceramic burner Btu availability from 30K-60K BTU's

 Contact your representative for your pricing!

  • $0.00
  • Specifications 17.4 kB
    It is the intent of this specification to identify design requirements and minimum standards for the quality, construction, delivery, installation, and operation of gas fired infrared heating equipment. Minor variations, in accordance with standard practice, shall be indicated on the shop drawings and submitted for approval.
  • Owners Manual 836.4 kB
    High Intensity Infrared Heaters Installation, Service, and Maintenance Manual
  • Sales Literature 334.2 kB
    Sales Literature - Synergy High Intensity Heaters
  • SKU
    0SY0XX.(N/P)-Single30-60

Information

Manifold Operating Pressure
Natural Gas: 6 inches WC
LP/Propane: 10 inches WC

Minimum Inlet Pressure
Natural Gas: 7 inches WC
LP/Propane: 11 inches WC

Maximum Inlet Pressure
Natural Gas and LP/Propane: 14 inches WC
1/2 inch FPT Gas Inlet

Warranty
1 year limited warranty

  • Manufacturer
    Combustion Research
  • Individual BTU Input and Fuel Type
    30K BTU's / Natural Gas (NG), 35K BTU's / Natural Gas (NG), 40K BTU's / Natural Gas (NG), 45K BTU's / Natural Gas (NG), 50K BTU's / Natural Gas (NG), 50K BTU's / Propane Gas (LP), 55K BTU's / Natural Gas (NG), 60K BTU's / Natural Gas (NG)
  • Ignition Type
    115V Direct Spark, 24V Direct Spark, Millivolt Self Energizing
  • Single/Dual Stage
    Single Stage
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment
  • Proven system design – over 40 years with more than 3 million burners placed in service.
  • Instant heat on demand: reaches maximum operating temperature in less than 1 minute.
  • No direct venting required: less roof penetrations.
  • May be used in protected outdoor environments.
  • Operates on Natural or LP/Propane Gas
  • Factory pre-wired, pre-piped and tested.
  • Highly polished mirror bright aluminum reflectors for maximum efficiency.
  • Corrosion-free aluminized steel main frame.
  • CSA International Design Certified to ANSI/CGA Standards
  • 2-Stage Models Available
    • 2-Stage operation based on ambient temperature variations.
    • Eliminate excess heat when not needed.
    • Capable of fast recovery when temperatures fall.
    • Optimum combustion in both operating stages.
    • Air and gas ratios are precisely matched for efficient, fuel saving operation.
    • 24-volt input for lower installation costs.

Manifold Operating Pressure
Natural Gas: 6 inches WC
LP/Propane: 10 inches WC

Minimum Inlet Pressure
Natural Gas: 7 inches WC
LP/Propane: 11 inches WC

Maximum Inlet Pressure
Natural Gas and LP/Propane: 14 inches WC
1/2 inch FPT Gas Inlet

Warranty
1 year limited warranty