Previous image
Reflect-O-Ray 4.C EDS - Gas Fired Radiant Heater - Stainless Steel - bottom view - Reflect-O-Ray Label - CNG and special fuel facility rated
Next image
Zoom image

Reflect-O-Ray 4.C EDS (Stainless Steel)


Not rated yet

Stainless Steel Burner Inputs of 40,000 Btu/hr up to and including 60,000 Btu/hr.

Specifically designed for CNG and/or LNG vehicle maintenance along with other Specialty Fuel Vehicle Repair Buildings. The Reflect-O-Ray EDS\EHS 4.C Stainless Steel Single Input Gas Fired Radaint Infrared Tube Heaters meet code and safety requirements per NFPA 30A 7.6.6 and CSA guidlines. This heating system is in compliance with NFPA 30A 7.6.6 and CSA registered that the maximum allowed tube or surface temperature is 750 °F (399 °C) for specialty Fuel Vehicle Repair Buildings.

Specialty Fuel Vehicle Repair Buildings, Applications include Aircraft Hangers, Animal Confinement, Auto Dealerships, Brooders, Car & Truck Wash Bays, Commercial Applications, Greenhouses, Industrial Applications, Large Warehouses, Oil & Lube Shops, Patio's, Pole Barns, Service Garages, Shipping & Receiving Docks, Steel Warehousing, Swimming Pools, Warehouses, and more!

Contact your representative for your pricing!

  • $0.00
  • EDS-4.C-EHS-4.C Owners Manual 2 MB
    Gas fired, Low Intensity Infrared Vacuum Vented Infrared Heating Systems. Compliance with NFPA 30A 7.6.6 – maximum allowed tube temperature of 750 °F (399 °C) for Specialty Fuel Vehicle Repair Buildings. Installation, Operating, Maintenance and Parts Manual
  • SKU
    08XXX.(NG/LP)SS.C
Reflect-O-Ray® EDS Stainless Steel 4.C GAS FIRED SYSTEMS

Stainless Steel Burners compliant with NFPA 30A 7.6.6 for use in Specialty Fuel Vehicle Repair Buildings. With inputs of 40,000 Btu/hr up to and including 60,000 Btu/hr. Systems are designed to your specifications! With Reflect-O-Ray® 4.C EDS you can heat 500 sqft to a million sqft and more.  By working with us, your Manufactures rep, and Local contractor of your choice we are able to properly calculate your heat loss, custom design radiant infrared heating system, install the system, and provide valuable after purchase follow-up by joining our free newsletter mailer.

  • Manufacturer
    Combustion Research
  • BTU's
    40K Btu's, 45K Btu's, 50K Btu's, 55K Btu's, 60K Btu's
  • Fuel Type
    Natural Gas (NG), Propane Gas (LPG)
  • Burner Voltage
    24v
  • Exhauster Voltage
    110V, 208V, 277V, 240V, 480V, 600V
  • Exterior Finish
    Stainless Steel
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment
  • 10 Year Warranty on Radiant Tubes For Internally Created Corrosion
  • 100% factory tested.
  • 3 Try Direct Spark Ignition - 100% Safety Lockout
  • Compliance with NFPA 30A 7.6.6 for use in Specialty Fuel Vehicle Repair Buildings
  • Burner Flame Inspection Window
  • CSA Certified (Formally A.G.A & CGA)
  • Each System is custom designed for optimum comfort and fuel efficiency.
  • Easy Installation
  • Electronic Flame Monitoring
  • Emitter Tubing S.E.C. Designed for Optimum Efficiency and Output
  • Energy Savings of 30-50% over Conventional Heating Systems
  • Natural Gas or Propane Gas
  • Powder Coated Burner Housing
  • Pre Purge Cycle
  • Radiant Tubing Constructed Entirely of Corrosion Resistant Aluminized Steel
  • The "Original Dry Tube System!"
  • Vacuum Fired Systems
  • Aircraft Hangers
  • Large Warehouses
  • Animal Confinement
  • Oil & Lube Shops
  • Auto Dealerships
  • Patio's
  • Brooders
  • Pole Barns
  • Bump Shops
  • Service Garages
  • Car & Truck Wash Bays
  • Shipping & Receiving Docks
  • Commercial Applications
  • Steel Warehousing
  • Greenhouses
  • Modulating Dual Input
  • Specialty Fuel Vehicle Repair Buildings