|
|
|
Omega II DI PEP (Powder Coated)
Modulating Two-Stage Gas Fired Infrared Tube Heaters
Heaters provide precise air to gas ratios at both the high- and low-heat stages for optimum efficiency. Excessive overheating is prevented and a softer, more stable and comfortable environment is maintained. Saves up to 75% in energy costs. Power vented system with BTU inputs available from 85K to 200K manufactured in the US.
Contact your representative for your pricing!
True Dual Two-Stage Gas Infra-Red Tube Heaters provide precise air to gas ratios at both the high- and low-heat stages for optimum efficiency. Excessive overheating is prevented and a softer, more stable and comfortable environment is maintained. Saves up to 75% in energy costs. Power vented system with BTU inputs available from 85K to 200K manufactured in the US.
Pre Engineered Packages. Gas Fired, Unitary power vented systems.
- Manifold Operating Pressure
- Natural Gas and LP/Propane: 5 inches WC
- Minimum Inlet Pressure
- Natural Gas: 7 inches WC
- LP/Propane: 11 inches WC
- Maximum Inlet Pressure
Natural Gas and LP/Propane: 14 inches WC
1/2 inch FPT Gas Inlet - Electrical Rating
- 120 VAC – 60 Hz – 1 Phase
- 30 max. amp. draw at 138 cfm/free air
- Warranty
- 10 year limited warranty on Burner Core
- 10 year limited warranty on All Combustion and Heat Exchanger tubes
- 2 year limited warranty on All Burner Controls
For use in Aircraft Hangers, Large Warehouses, Animal Confinement, Oil & Lube Shops, Auto Dealerships, Patio's, Brooders, Pole Barns, Bump Shops, Service Garages, Car & Truck Wash Bays, Shipping & Receiving Docks, Commercial Applications, Steel Warehousing, Greenhouses, Swimming Pools, Industrial Applications, Warehouses, and more!
-
ManufacturerCombustion Research
-
High Fire / Low Fire Btu's85K / 65K Btu's, 100K / 65K Btu's, 125K / 95K Btu's, 150K / 100K Btu's, 175K / 125K Btu's, 200K / 145K Btu's
-
Fuel TypeNatural Gas (NG), Propane Gas (LP)
-
Voltage110V
-
Burner Tube Diameter4.0 Inch
-
Air Inlet Diameter4.0 Inch
-
Exhaust Diameter4.0 Inch
-
Exterior FinishPowder Coated
-
EnclosurePartial
- True Dual Modulating Heater
- Two-stage operation with both gas and air modulated for high- and low-heat
- Aluminized titanium alloy combustion chamber
- Heavy Duty 12 gauge 4” O.D. heat exchanger
- Simple chain mounting
- CSA International Design Certified to ANSI/CGA Standards
- Bright aluminum reflectors
- 98% reflectivity
- 7% reflectional efficiency (shape)
- Rotatable reflector arrangements at 0° or 30°
- Each reflector rotates independently
- Burner fully assembled and tested – ready to hang
- Factory installed wave turbulator for high efficiency
- Safe, reliable operation
- Durable direct spark ignition
- 100% safety shut-off
- Pre-purge cycle for safety
- System validation light
- Options:
- Recessed Ceiling Kit
- Side Reflector
- 90° Elbow
- “U”-Bend
- “Y”-Couplers
- Inlet and Exhaust Kits
- Stainless Steel Construction
