Reflect-O-Ray^® EDS 6 CASE HISTORY

Greensboro, NC. The Reflect-O-Ray^® EDS 6 low intensity infra-red heating system was selected for the 80 foot tall Timco Maintenance hangar. Even though the equipment cost of the Reflect-O-Ray^® EDS/6 system was somewhat higher than the competitive systems, including our own Reflect-O-Ray^® EDS 3.5, the installed costs showed substantial savings in gas piping (65% less), electrical service and installation labor. With all these factors combined, the total savings for this application were in excess of $40,300.00. Add these savings to the elimination of condensate lines and disposal, Reflect-O-Ray^® EDS 6 becomes the radiant system of choice.

The Reflect-O-Ray^® EDS 6 system, designed for high bay facilities, allows the engineer to create the uncluttered appearance shown with this aircraft hangar. Timco's Hangar is designed to hold two 727 and one 747 planes at the same time. Timco performs full service aircraft renovations. The huge hangar doors are often left open for more than an hour moving the large aircraft in the hangar. The rapid heat recovery of the Reflect-O-Ray^® EDS 6 system, hung at 60 feet, is continually proven.  Timco has benefited from continued savings with the reduced fuel usage inherent in Reflect-O-Ray^® radiant heating systems.  A second hangar next door to the one pictured above has since been built and the heating system of choice was the Reflect-O-Ray^® system.

Combustion Research Corp. is proud to be a part of Timco's state of the art facilities. We thank Timco for the opportunity to serve them with the finest infra-red heating system available - Reflect-O-Ray^® ENGINEERED DESIGNED SYSTEMS.

BACK    CRC HOME PAGE